APW Wyott AT-30 Operations Instructions download pdf (Page 3)

Model Stock Dimensions* Electrical Productivity Weight

Number Number Halves/Hour Net/Ship

83501 120V-1600W-13.3A Up to 1600

M-83 83502 20"H x 24 5/8"W x 12"D 208V-1600W-7.7A “ “ 83/93 Ibs

83504 50.8 cm x 62.6 cm x 30.5 cm 230V-1470W-6.4A-50Hz “ “ 37.7/42.2 kg

240V-1600W-6.7A

84578 120V-1600W-13.3A Up to 1600

M-830 84579 20"H x 24 5/8''W x 12"D 208V-1600W-7.7A “ “ 83/93 Ibs

84590 50.8 cm x 62.6 cm x 30.5 cm 230V-1470W-6.4A-50Hz “ “ 37.7/42.2 kg

240V-1600W-6.7A

M952AA001 120V-1800W-15A

M-95-2 M952CA001 30 1/2"H x 21 1/2"W x 17 1/2"D 208V-2780W-13.4A 681bs.

M952EA001 77.5 cm x 54.7 cm x 44.5 cm 230V-2550W-11.1 A-50Hz 30.9 kg

240V-2780W-11.6A

M953AA001 120V-1800W-15A

M-95-3 M953CA001 30 1/2"H x 24 1/2"W x 17 1/2"D 208V-2780W-13.4A 77lbs.

M953EA001 77.5 cm x 62.3 cm x 44.5 cm 230V-2550W, 11.1 A-50Hz 35 kg

240V-2780W-11.6A

*With Superfeeder: M-83 & M-83D - add 11” (28cm) to height, 4 1/2” (11.5cm) to depth.

M-83, M-83-D & M-91 & M-95

SPECIFICATIONS:

PLEASE READ PAGE 2 - “GENERAL INFORMATION”, BEFORE YOU CONTINUE.

Electrical Information - All Models

Each unit is equipped with a 4 foot (122cm), 3 wire grounded power supply cord which terminates with a 3

prong plug. The 120V units have a NEMA 5-15P plug. The 208/240V units have a NEMA 6-20 plug.

NOTE: Units rated 120V for installation in Canada have a NEMA 5-20P plug.

INSTALLATION

1. UNPACK UNIT

a) Remove unit from shipping carton, unwrap loose parts and remove any packing tape,

plastic wrap and nylon tie-down.

b) Refer to the illustrations below and account for the following parts:

Part M-83 M83-D M-91 M-95

Legs (Item 1) wrapped, internal package wrapped, internal package wrapped, internal package wrapped, internal package

Butter Roller (Item 2) plastic wrapped, shipped in place - plastic wrapped, shipped in place -

Butter Pan (Item 3) plastic wrapped, shipped in place - plastic wrapped, shipped in place -

Conveyor (Item 5) boxed, external package. boxed, external package strapped in place with nylon tie -

Bun Chute Feeder (Item 7) shipped in box with Conveyor shipped in box with Conveyor wrapped, internal package wrapped, internal package

Instruction Manual wrapped, internal package wrapped, internal package wrapped, internal package wrapped, internal package

Teflon Sheet Kit (optional) wrapped, internal , package wrapped, internal package wrapped, internal package -

NOTE: Prior to initial start-up, all removable parts and the grill surface should be cleaned with warm, soapy

water to remove manufacturing oils, then rinsed and dried thoroughly. Apply oil to the conveyor chain after

washing. Also the grill surface should be seasoned with a light coating of oil (fry oil works well) and pre-

heated for 15 - 20 minutes.

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

APW Wyott AT-30 Operations Instructions Page 3

Comments to this Manuals

Related products and manuals for Toasters APW Wyott AT-30